Description:

R56 Race Car For Sale

Vehicle Information
Year: 2007
Make: Mini
Model: Cooper S
Engine: N14 1.6 Turbo

Last Miliage on shell: 55,000

Current Milage: 200 miles approx

Power: 430HP at the wheels 353ftlb at the wheels @ 1.8BAR

Regrettably, I have to put my R56 mini up for sale. This is a one off R56 being one of the fastest in the UK. This build started a while back but due to a change of circumstances means that this has to go. The plan was to MOT the car and use it as a fun fast road car as-well as a track/race car.

This car has been built mainly by Millsys Autos and myself. Anyone who knows Jason at Millsys Autos will know he is very meticulous and is amazing at what he does with Mini’s. The Car has been dyno’d and tuned by MGT Motorsport on their hub dyno. 

Car is the standard Metallic Blue underneath the wrap apart from the bonnet and boot lid.

There are a few bits needed to make this car 100%. Suspension does need setting up as this has not been done and Front splitter needs bolting to the underside of the car, Carbon wing mirrors need fitting (supplied), 2 wheels are silver and 2 are white. To make this race legal both MSA/FIA regulations, the car will need a in date seat and for FIA regs, in date harnesses and tow eyes need to be fitted which will come with the car alone with a new fire extinguisher due to the blue book changes.

The car could do with a tidy up as this has been in storage for a couple of years now. The car runs and drives with no issues as this is a fresh engine barely broken in.

Has brand new NS2R tyres on the car ready to go. 

Car comes with a box of spares, different brand new fibreglass front bumper, mini challenge dash of spare parts, new coil packs and V5 logbook with 1 key.

This car has cost me £££££ to get it where it is now but it has to go. 

Car is located in Herne Bay, Kent. Viewings can be arranged by appointment only. Serious buyers only.

Please see specs list below, I’m sure there is more but I can’t think of these for now.

Any questions please don’t hesitate to ask.

Engine

N14 Closed Deck by CPL Racing with Darton Sleeves.

CP Carrillo Pistons and Rods 77mm 9.5.1 Compression ratio.

Cometic Head Gasket.

Custom Head Work.

Supertech Sodium Filled Inlet Valves and Inconel Exhaust Valves.

Supertech valve guides, seals, springs and titanium retainers.

ARP Bolts Throughout.

Lightened, balanced and knife edged Crank.

Custom Metal Intake Manifold with 4 extra injectors.

Piper Cams race profiled re ground Cams.

13 row Sabelt oil cooler with Mototek block off

Mocal remote oil filter.

Racing lines Hi Flow Fuel Pump

Cooling

Bigger Intercooler Core with custom pipe work.

Custom Larger Radiator.

Heat-lagged exhaust pipework.

Heat-lagged braided hosing throughout.

Powdercoated Alloy expansion tank.

Turbo

Borg Warner EFR 7163 VBand housing E/G.

Ram Air GRP A Cone Filter.

Drivetrain

Helix 4 paddle Clutch and Lightened Flywheel.

Gripper 2 Way LSD.

Coolerworx Short Shifter.

Suspension

Meister CRD+ Coilover Suspension.

Hotchkis 26mm RARB

R+D Rose Joint Droplinks.

Hotchkis Rear Control Arms x4.

Fully Polybushed (Powerflex Black)

Superpro Caster Bushes.

Exhaust

Fully Custom System and Manifold.

Turbosmart Compgate E/W.

Turbosmart Dump valve.

Safety

Custom Design and Fabricated Roll Cage Made By Fast Road Conversions Ashford.

FEV Electrical Fire Extinguisher (Gas not Foam).

Cartek Electrical Cut Off Switch.

Luke 5 Point Harnesses x2.

Corbeau bucket seats (Not FIA).

Electronics

Aim Strada MXS w/GPS Logger.

SCS Standalone GDI4 ECU (modified) 5 stage traction control, Anti-Lag, Launch Control ect....

Custom alternator relocation bracket.

Varley Redtop Battery Relocation.

Interior

Mini Challenge Dash (Not Fitted, can be included if the price is right)

Current dash is flocked.

Brakes

Front K-Sport 8 Pot 330x28mm w/ BTCC Pads.

Rear M-Tec C Hook Discs w/ Rear EBC Yellow Pads.

Comp Brake E Brake.

Exterior

Fibreglass Bootlid

Fibreglass Bonnet

Fibreglass Bonnet Vents

Fibreglass Doors

Fibreglass Wide Arches

Fibreglass Rear Diffuser

BYC Custom Rear Wing

M7 Carbon Splitter

3M Wrap Carried out by RGVA Vehicle Graphics, Kent. Standard metallic blue underneath except for bonnet and bootlid.

ACW 4mm windows with vents and sliders

17x8 Team Dynamics

Keyword Search Terms: