Description:

This Ex works Repsol liveried Nissan Primera was driven in period by Eric van de Poele in the 1996 Spanish Touring Car championship taking 5th overall with 2 outright wins that season.

For 1997 with factory support it was entrusted to Vaclav Bervid in the Central European ST championship finishing second overall with 6 wins 3 pole and 7 fastest laps.

In 1999 the car was returned to the UK and raced by Keith Butcher and Derek Hales in the Formula Saloon championship that was the forunner to the now very popular HSCC SuperTCC series that for 2015 will races at Silverstone Classic and the BTCC Toca package.

This Nissan chassis 23 was designed and built by the team at Nissan Motorsport Europe and was the design that dominated in the BTCC taking the championship outright in 1999.

Chassis 23 has now been returned to its original Repsol Spanish CET livery in readiness for a season in SuperTCC.

Technically the car boasts an incredible spec with a fresh 300bhp reverse head 8 injector laid back engine coupled to a 6 speed Hewland sequential gearbox with interchangeable ratios, all run by a Pectel T6 2000 ECU and Aim dash. The Roll bars are adjustable from the driving seat with power steering and twin calliper ap water cooled brakes being other features of this incredible bespoke Super Touring Car that in 1996 cost around £250,000 to build.

Sold with an entry to the SuperTCC races at the 2016 Silverstone Classic .

Zero miles on engine after rebuild

New bearings and refreshed gearbox 

Included with the car is a comprensive spares package listed below, historic documentation, set up data etc, Spare engine option can be available through negotiation.

CHASSIS 23 PRIMERA SPARES LIST

1 BONNET

1 BOOT

1 SET OF 4 DOORS

1 FRONT BUMPER

1 HEADLAMP

1 GRILL

PR TRIM PANELS

3 DOOR MIRRORS

VARIOUS RUBBER SEALS

6 WHEELS

PR WHEEL NUTS 

5 2014 DUNLOP WETS

5 2014 DUNLOP SLICKS

SET REAR LIGHTS

SET OF HINGES

1 WIPER PANEL

PR FLARED ARCH WINGS IN FIBRE GLASS

1 FRONT UPRIGHT HOUSING

1 FRONT HUB

1 SET OF NEW DRIVE PINS

FRONT HUB FIXING HARDWARE

1 ELEC POWER STEERING PUMP

1 STEERING RACK FOR SPARES

VARIOUS ANTI ROLL BAR ENDS, FIXINGS LEVERS AND BLADES

PR USED FRONT DISCS

1 REAR DISC AND BELL

AP AIR JACK LANCE

1 OTHER AIR JACK LANCE

PR REAR CAMBER SHIMS

1 FRONT CAMBER SHIM 

1 ENGINE MOUNT PIN

1 ENGINE MOUNT SLIDE HAMMER FITTING

1 FRONT SUSPENSION ARM

1 REAR SUSPENSION ARM

PR TOP MOUNT BODY MOUNTS

1PR TOP ARMS

1 CALIPER MOUNTING BRACKET

1 BOTTOM BALL JOINT HOUSING

1 STEERING RACK ARM/ ROD

1 ALTERNATOR SUPPORT ARM

VARIOUS BUMPER MOUNTS AND PINS

1 SPLITTER MOUNT V LOCATER

1 ANTI ROLL BAR LINK

1 2 INTO ONE WATER PIPE WITH WIGGINS FITTINGS

2 LOBRO BOOTS NEW

1 ENGINE WATER TRANSFER PIPE

1 V BAND CLAMP FITTING EXHAUST

VARIOUS BRAKE CALIPER PINS AND USED PADS

1 -6 HOSE

VARIOUS BELTS

1 PR SPLITTER RUBS

1 UNUSED DRY SUMP TANK

1 CROSS SHAFT

18 SPARE GEAR RATIOS

3 DOG RINGS

1 REFURBISHED MAIN SHAFT

1 LAYSHAFT

1 CROWN WHEEL

1 RELEASE BEARING HOUSING

2 OUTPUT SHAFTS

1 CASSETTE CASING

1 SELECTOR CASING

1 GEARBOX TOOL

VARIOUS GEARBOX PARTS

SET UP BARS

VARIOUS SUSPENSION SPRINGS

DOCUMENTATION INCLUDING CIRCUIT/ SET UP DATA FROM 97 AND 98 HOMOLIGATION PAPERS, LOG BOOK, GEARBOX PARTS BOOK, RATIO SPEED CHART.