Description:

Intercomp SW500 vehicle weigh scale kit

These Intercomp SW500™ E-Z Weigh Computer Scales are the ideal introduction to scale systems with all the features required to make an on track difference. Intercomp scales provide the necessary data for any racer to become a chassis expert.

• Displays Setups to One-Hundredth of a Percent
• Stores 100 Chassis Setups
• Baseline Setup Recall
• User Selectable Display Modes
• View Any Combination of Scale Pad Weight and Percentage
• Centre of Gravity Calculation
• Target Tune Feature
• Certified to 0.1% Accuracy 
• 9v Battery Operation
• RS232 Output
• Giant 0.5" Display Characters
• 700kg (1,500lb) Pad Capacity
• 2,800kg (6,000lb) System Capacity

System Includes:

• 15"x15"x2.5" (381x381x64mm) Billet Scale Pads
• 9v Battery
• Very strong flight case. (Not normally supplied)

The 4 Intercomp Roll on/Off Pads

They are designed to fit any 15"x15"x2.5" (380x380x64mm) scale pad. Allows the car to be rolled on and off the pad with little effort which prevents side load effect on readings.

Precise weight distribution is critical to on track success. Setting ride heights and suspension geometry is only part of the story with vehicle setup, the four corners of the car may still be bearing different amounts of the car weight. The unequal weights on each corner can be felt as the car rolling more when turning in one direction than the other. The cars stability is compromised which will adversely affect its balance. A well balanced car is generally easier to drive quicker due to increased driver confidence, an unbalanced car will be difficult to drive and give the driver no confidence.

To make sure weight percentages are correct, computerised scale system must be used. Correct chassis setup separates the front runners from the followers. Corner Weight Scales provide the necessary data for anyone to become a chassis expert.