Description:

I have a pair of shafts for sale which I had made for an alternative (Pankl/Drexler) gearbox fitting on my Dallara, in the end I didn't use the other 'box so these are now surplus.

Made by the fabled Ray Eade (Ratec) these are both light and strong, the material used is 300 grade maraging steel suitably heat treated - see Wiki for spec, low weight (about 1200 grams) is achieved by gun drilling.

The overall length is around 583mm., the spline diameter is around 24.5 mm and is designed for a standard 22 spline GKN Motorsport type tripod joint.

The original cost was around £750 I'm offering them at £499.