Description:

The car was built in 2020-2021 by GSR Motorsport, with consulting su such widely known companies as Samsonas Motorsport, Katech, G-Speed and LG Motorsports. Most parts were bought new and premium. Car was made to showroom condition inside and outside. Car was tested in 6h endurance race, everything works as it should. Car is CHEAP TO MANTAIN. Here's the list of what was done:
 

•SAMSONAS 6 speed sequential gearbox with paddleshift and throttle blip (0 km after revision)

•7200cc stroker LS7 with heads fixed, forged internals, making 613whp and 740wNm (~700hp at the crank) with only 6h of use (major revision in 2021 August)

•LG Motorsports thick cooling radiator (94C in endurance mode)

•Long tube headers

•"MSD Air Force" intake manifold

•Full custom motorsport wiring (engine + interior)

•KATECH increased capacity oil pump

•Upgraded dry sump system

•Custom side exit exhaust pipes

•Fully programable Emtron ECU

•Traction control (4 stages, controlled on steering wheel)

•BOSCH motorsport ABS

•PDM modul with can keypad

•TILTON pedal box

•3.91 differential from a GT4 car

•Custom gearbox and diff cooling solutions (94C gearbox and 75C diff oil temperatures in endurence mode)

•Uniball spherical bearings

•3-way SAMSONAS adjustable coilovers with reservoirs (only 3 races, bought new in 2021)

•AP Racing 6pot + 4pot calipers with PFC brake discs (378mm/F, 350mm/R)

•Additional front brake cooling

•Aero: custom front spliter, ZR1 aero pack, 170cm double adjustable GT Wing from Radical SR8

•Air jack system

•Fire extinguish system

•Small steering wheel with contronls on it: flash, turn signals, wipers, pit limiter, engine power and traction control

•120l ATL fuel cell with swirlpot (also OEM fuel tank available)

•3 sets of BRAID wheels: 18x10j (F) ir 18x12j (R)

•Several sets of used Hankook slick tires 280/66r18 (F) ir 320/71r18 (R)

•Recaro seats with narrow endurance type Schroth seatbelts, similar set for passenger.

•Custom carbon fiber interior

•Hood scoop for driver cooling

•Rear view camera

•Steering wheel quick release 

•Morimoto style headlights with prtective foil (bought new in 2021)

Custom hood vents, custom front wheel arch vents

This is an original C6 Z06 Corvette, so it comes with a lighter aluminum frame, dry weight is a bit higher than 1300kg. It has FIA homologated custom roll cage that was made so that it would be easy to get in/out of the car. 

Car is sold with a classic JPS style black/gold wrap but can be wrapped with your design prior to picking it up. 

Facebook:

Keyword Search Terms: