Race Cars
$ 79,000
1967 Chevy Camaro - SOLD
This is now SOLD. Search for similar items.
Description:
1967 Chevy Camaro
Beautiful and well sorted, front running SVRA/HSR/VSCDA 1967 Camaro. Ex Rick Nichols with the best of everything and immaculately prepared by Stew Black Performance. Car has been fully balanced, scaled, and aligned for Road America and is ready to race. Fresh 310CID motor, Jerico 4-spd, triple disc clutch, Ford 9inch locker, floating axle/hub assembly, Wilwood front calipers (Optional: widened SS Corvette endurance calipers), power steering, 2 sets of AR 8x15 wheels. Car has run 2:27s at Road America. Car is fresh and ready to race. Will be at SVRA Road America in May if not sold.
$79,000 OBO
Contact: Brian Morrison for more pictures or information
617-461-6388
gtsportscars76@yahoo.com
Chassis:
Fully race prepared chassis with a full cage and side bars
Drilled and lightened front structure
Camaro tub and front subframe
Gutted Doors and nose
Motor:
Spare Karl Kustoms 310 (In Car)
Iron Block, Iron Straight Plug Head
561HP on 110 Leaded race gas
Aluminum Performance RPM Dual Plane intake
BLP Carb
Electric boost pump to the mechanical fuel pump
Dry sump
MSD 6A Ignition
Drivetrain:
5 ½ inch Tilton triple disc clutch
Hydraulic Throw out bearing
Jerico 4spd, 2.2, 1.6, 1.2, 1:1 ratio
Ford 9inch center with Detroit locker
4:33 rear gear
Floating rear axle and hub assembly
HD Custom driveshaft
Body/Interior:
Glass windshield
Plexiglas rear window
Fire Bottle System
5 Point race harness
Fiberglass hood
22 Gallon fuel cell
Light, but legal weight
Suspension:
Dual wishbone front suspension
Power Steering 12:1 box
QA1 Adjustable Shocks
HD Corvette C3 front spindles
Modified low A-arms
Billet big bearing front hubs
C3 Corvette Rear steering arms
Geometry mapped roll center, ride camber gain, bump steer corrected
Ackerman HD adj tie rob ends
Adjustable front and rear sway bars
OE Corvette Ball joints
OE Camaro upper ball joints
OE front and rear leaf pivots
Rear leaf springs rate stacked
Brakes:
Fronts are currently Wilwood / Rear SS sleeved O-Ring caliper
(Optional) Fronts are widened, SS sleeved, endurance Corvette calipers, with O-Rings
HD GM cast iron vented rotors in front
HD vented rotors with AL hats in rear
Tilton triple master cylinder
Brake Bias adjuster with brake pressure gauge
Custom front brake air ducts
MISC:
Spare Motor 302CID
Misc Spares
Scale Sheets
Dyno Sheets available
Spare Passenger seat
Cool Suit Option
Vintage Log Books