Description:

This is the sale of my BMW 328 Track Car.

Have been slowly building this car to eventually race and due to time have decided to sell it on as I'm not doing the car justice.

Specification Below:

Engine

2800cc M52B28 - Petrol

Remapped to 251 bhp with 260 lbs of torque by BW Chiptune

M50 Manifold & Big Bore Throttle Body

Power Pulleys

Viscous Fan Delete

M3 Oil Cooler with M3 oil filter housing added to engine

Kenlowe Twin speed Electric Fan

Silicone Hoses to Fan

Painted engine bay and internal arches rebuilt

M3 brake cylinder and servo

Simota Carbon Fibre Air Induction

Cold air hoses run to brakes and engine bay from fog light apertures

Nanodrive 10w60 fully synthetic oil used, recently changed

Vibra technics Engine Mounts

M3 exhaust manifold, with exhaust wrap

Stainless Steel De-cat Exhaust

Lightened and balanced flywheel & clutch

Chassis/Suspension/Brakes

Superpro poly bushes fitted

Eibach Anti Roll Bars front & rear

Eibach rear camber arms

X brace fitted

Suspension - AST5100 setup -3.5 front and -2.5 rear

Corner weighted - Car weight is 1130kgs

BMW Road Wheels 225/45/17 all good tread

Studs fitted to hubs

Motorwerks UUC Magnesium Strut Brace

Rear Struct Brace fitted

Discs to front less than 500 miles

EBC yellow stuff pads fitted to front and rear

Brake callipers have had the rubber ferrules replaced with aluminium ones

Braided hoses fitted to brakes

Motul 5.1 brake fluid used

Quaiffe Limited Slip Differential Fitted

Wheel spacers fitted to allow setup to be square

Bodywork

Side cills replaced

Roof skin fitted to replace roof with sunroof

Resprayed from Black to Grey - PPG: LZ7S

Fibreglass bonnet with recessed catches, wings & boot with spring catches

Fibreglass three piece GT spoiler

GT wing mirrors

Removable front bumper for maintenance

Carbon fibre front splitter

M3 aluminium doors

TRS Towing straps fitted front and rear

Angel eyes fitted with LED upgraded bulbs

Black Mesh fitted to front bumper to protect air ducts and oil cooler

Rear arches have been rolled

Cockpit

Stripped out to shell

Welded seat mounts to bodywork

Six point bolt in cage - Not FIA/MSA

Sabelt GT130 fibreglass - Driver and Passenger - In date

TRS Limited Edition Silver Six Point Harness to both seats

Race Technology Dash 4 with GPS/Data logger and four bullet cameras, two fitted currently pointing front & rear view - with data cards

Removable steering wheel and boss fitted

Carbon Fibre dash with stack fuel gauge

Carbon fibre dash display housing Race Tech Dash 4

Extra wide race mirror fitted to cage

IRP short shift gear lever

Chequer plate sprayed black to passenger side footwell

Steel plate fitted to footwell to give one level

Car Cover

Car prepared by Simon Green Motorsport

Personalised Number Plate Not Included