Description:

** reduced **

Motionsport's Lotus Elise is well known within the endurance racing scene. If you are not aware of this car, then please bear in mind that this is no ordinary Elise, but a fully built racecar.

It's notable highlights include:

• 2011 Britcar British Endurance Championship - Class 1 Champions (Production)
• 2011 Britcar 24hr - 6th Overall (last of the large grids!)
• 2012 Barcelona 24hr - Class Winners (Class 5)
• 2013 Dubai 24hr - 2nd in Class (Class 5)
• 2013 Bathurst 12hr - Class leading for 11 hours (until an accident DNF'd us :()

This car was built and engineered specifically for endurance racing in 2010/11 with no expense spared and is proven reliable and competitve. It has recently been completly rebuilt, nut and bolt, by BAMD Ltd (http://www.bamdltd.co.uk/) to the highest standards, including a full bodywork repaint and refresh. The spec is too large to list and I would encourage anyone that doesnt know this car to come and take a look.

• Honda K20a 2.2l high spec ClockWiseMotion 'endurance' engine. >260bhp at the hubs (some 290-300bhp) as measured and calibrated by Torque Developments International
• Custom engine mounts to enable engine position to be rolled for better shaft angles 
• Standard OEM Honda 6 speed H-pattern gearbox for reliability. Modified mount for quick removal
• AP Racing paddle clutch
• Mocal Gearbox cooler controlled by PDM
• Mocal Oil coolers controlled by PDM
• Large Pro Alloy Radiator with twin fans controlled by PDM
• Motec M800 ECU
• Motec PDM30 PDM
• Motec SDL2 Dash with Shiftlights
• Full Raychem race harness built by Perlec
• Small and large Ballast HID front lights
• 24hr removable front light bar
• Quantum 2-way dampers (zero miles)
• Eliseparts T45 GT uprights, Steering Arms and Wishbones
• Eliseparts wheel studs
• Pilbeam peddal box with large AP resevoirs for thicker endurance pad use
• AP Racing 4-Pot calipers on the front and AP Racing Elise (front) calipers on the rear
• 285 mm AP rotors floating on Elise Parts bells
• ATL 70l bag tank with custom collector
• Removeable 18L front tank for extra range
• FIA Fuel takeoff
• Twin ATL dry-break fuel fillers
• Full 6 point SafetyDevices rollcage
• Custom firewall
• Custom dashboard and switch panel (PDM controlled)
• Custom remounted front and rear clams to enable a lower ride height without bodywork fouling on the floor!
• Custom wheelarch liners to deal with 24hr racing tyre debris
• Perspex side and rear windows
• Custom aerokit comprising of effective underfloor, splitter and rear diffuser with chassis mounted Reverie carbon wing.
• 4 sets of Team Dynamics Pro Race 1.2 wheels

Weight: 750-775kgs (depending on sprint vs 24hr trim)
Fuel consumption: 0.6 - 0.7l/m

An incredibly competitive car over short and long distances and ideal for the Endurance Racing Series, Britcar or many other UK race series and a proven winner in the Creventic 24hr Series. Built and run by professionals to the highest possible standard.

Car currently located in Cirencester and viewing highly recommended.

Also availble: 40ft rigid with 2 tonne taillift and two GT car deck.

Simon@motionsport.co.uk

Website:

Video: