Description:

These parts are new in boxes and were acquired as part of a failed Corvette project.

the engine was spec's as a 377 with a target of 670bhp in mind (pump gas).
 

Most parts were bought in 2023 and we have seen prices go up since. Donovan blocks are made to order so lead time is generally months. This is in the UK on a pallet. 

This is what’s included:

1. NEW: Donovan 350/400 small block Chevy billet aluminium 4-bolt mains race block. Weighs approximately 100lbs less than conventional cast iron and is a purpose built performance race block rated to c.800bhp. 

2. NEW: Callies Crank 4340, internally balanced 6.625 with 6.3” H beam Rods 

3. NEW: JE forged race pistons 4.125 with pins, locks and rings 

4. NEW: Crower 00503 billet roller cam 

5. NEW: Clevite Cam Bearings 

6. NEW: Morrel roller lifters

7. NEW: Pair of Air Flow Research AFR227 Alumiunium ported race heads including titanium valves and PAC Springs 

8. NEW: MSD billet distributor 85551 

9. NEW MSD Blaster 2 Coil

10. NEW: Mocal dry sump oil tank

11. NEW (unboxed) high volume racing water pump 

12. ⁠NEW Cloyes 2-piece racing timing gear cover 

13. NEW Jones Racing pulley 

14. ⁠USED: dry sump pan 

15. USED: Ric Wood Motorsport SBC Tall valve covers with breather 

Including shipping and taxes in today's money these parts total £20K+ this excludes the fact that Donovan Blocks are simply unavailable. 

It needs a couple parts to finish, rockers and pushrods, damper, gaskets etc. but all major components are there to begin immediate assembly. 

also available separately is a Tex Racing G-Force T10 synchro box in magnesium casing. This 4-speed box is rated to 750+ bhp. 26 spline clutch and 32 spline yoke. 

Message for info. This is a race winning engine in whatever you put it in. 
 

Keyword Search Terms:

Small block Chevy, Chevy, SBC, dry sump