Description:

The car was built for Drift Masters and participated there in 2023

Engine 2JZ 3.4L 
- 22JZ Piston Kit - 94mm Stroke, 3.4L
- Bearing set JZGTE/GE
- 2JZGTE Main studs
- Head studs 2JZGTE/1JZGTE
- Set of main blank covers
- Oil pump drive gear
- ATI SFI Performance Harmonic Balancer
- Racing timing belt
- Oil injector
- Turning work on the block (boring for pistons, strengthening the block with strand plates, opening channels, etc.)
- Chepa Racing CNC preparation sample engine
- Workpiece holders/locks
- Toyota OEM Solid Tappets
- Intake valves 2JZ
- Exhaust valves 2JZ
- Exhaust Valve Guides
- Intake valve guides
- Valve stem seals
- Camshafts - Racing Specification
- Adjustable cam mechanism
- Single Spring/Titanium Retainer Kit
- Timing bracket CNC ChepaRacing
- Turning work on the cylinder head (installation of guides, cutting out seats, grinding the plane, etc.)
- ChepaRacing CNC Valve Caps
- Oil pump 4 Stage
- Pump Mount Universal
- ARE 3 Bolt on Drive Mandrels
- ARE Drive Pulleys Gilmer
- ARE Pump Pulleys - Gilmer
- ARE Gilmer Belts 240L 5pcs
- ARE Screen Fittings 12AN 3 pcs
- Dry Sump Oil Tank 3.0 Gallons #7030
- 1 Liter Capacity 10" ht X 3.5" Diameter
- CNC Remote Oil Filter Adapter Billet Aluminum Uses HP
- Toyota Supra 6 Cylinder Dry Sump Pan
- CNC Machined Remote Oil Filter Adapter, Billet Aluminum, Used by HP
- PlazmaMan (engine intake system)
- Billet intake manifold 2JZ-GTE - 6 injectors
- Throttle Body Adapter - DBW Bosch 74 to 3 inch Plazmaclamp
- Generator 270A

Fuel system
- FIA RADIUM sports fuel tank with anti-reflux
- 20-0692-03 FCST, 3 Surge Tank Pumps and 1 Lift Pump Included, Walbro F90000274 E85
- 20-0505-V Remote Mount Fuel Filler, 1.5in, Vented
- 20-0547 Remote Mount Fill Neck, 24AN Elbow,
- 20-0484-08 Fuel Cell Vent Kit, 8AN
- 20-0247-08 Fuel Level Sender, 0-90 ohm, 8in
- 20-0220-05 Fuel Filter Kit, Microglass, 6 Micron 2х
- 20-0122 2pc Clamp, 60mm, Dual
- 18-0025-05 Fuel Filter, Microglass, 6 Micron 3х
- rad20-0221 2x Heater
injeсtors ID1700x

Transmission
- Samsonas 5th speed sequential gearbox
- Winterse quick-change differential, new type 6 bolts
- Carbonfiber driveshaft
- Nissan GTR axles

Brake and Clutch system
- Tilton pedas
- Wilwood braking system
- Wilwood front 6 pistons
- Wilwood rear 6 pistons
- Wilwood handbreak 2 pistons

Suspension
- Wisefab front
- Wisefab rear
- BC racing coilovers
- Enkei rims

Electronis
- Racing wire
- Motec PDM30
- Motec PDM30 connector
- Motec keyboard
- Motec keyboard connector
- ECU Link Fury
- Dachboard Edash


The car was built in 2023 with total cost around 155 000 EUR. Before 2024 season it was fully refreshed and new engine was mounted, the old engine was refreshed and put to spare parts. In 2024 season just 2 race was participated in. So the car in mint condition and ready to shred next season

Additionally a lot of spare parts:
- Engine 2JZ 3.0
- Front and rear wisefab 
- Front and real coilovers
- Axles
- Steel Driveshaft
- Body Panels
- Intercooler
- Generator 270 amp
- Westgate 50 mm
- Westaget repairing kit
- Ignition coils
- Plugs
- Sensors
- Westgate
- Radiator cooling vents
- Steering rack
- Power Steering Pump
- Pedal cylinders
- 5 additional ratios for Winterse
- 2 front rims Enkei
- 8 rear rims Enkei
- 6 front tyres 235/40/17 Valino
- Some rear tyres Valino 285/35/18

Shipping worldwide! 
Any type of payment!

Keyword Search Terms: