Race Car Transport
BMW e36 M3 GTR TOP build
BMW e36 M3 GTR top build!
High quality build of BMW e36 M3. Every detail of this car has taken loads of time to manufacture and complete, everything is thought through so it would be light, strong, functional and easy to replace. Whole chasey has loads of hours of work put into it to remove ALL unnecessary weight resulting in only 960kg total weight. Engine revs and sounds like crazy. Attention to details is just amazing, we attach loads of photos to prove that. Right now car is prepared for short races, but can be equipped with bigger fuel tank and endurance brake callipers. Sequential gearbox installation is also possible to make this car completely insane.
Spacers fitted for show off wheels.
Price 45 000eur. email email@example.com or call me by phone.
Parts worth mentioning:
Engine S54b32 dynoed at 400hp 380nm
Vipec engine management
Inovate lambda sensors and management
Lightweight aluminum pulleys
Carbon fiber Airbox with carbon fiber air tunnel from front grill
Aftermarket radiator with powerfull fans
Lightweight,short side exhaust
Main fuel pump BOSCH
Low pressure fuel pump
Fuel pressure regulator
40L racing fuel tank
AIM evo 4 full datalogger with sensors and cameras
Aim evo 4 steering wheel with dash
Steering ratio converter(only 360 degrees of turn)
Pedalbox with adjustable brake balance regulator
Additional brake balance regulator
OMP fire safety equipment
Air jacks + elephant foots
Tilton 5,5 inch twin disk clutch assembly
Shortshifter with reverse gear protection
Modified gearbox with straight cut gears and faster synchronization
Everything sits tight on lightweight aluminum mounts
KAAZ LSD + 4.41 drive
Differential cooling (radiator with pump)
AP racing brake callipers
360mm discs front
340mm discs rear
Flossman full fiberglass bodykit:
Front bumper with spliter and partly flat bottom, Front fenders, Hood, Full roof, Trunk, Rear bumper, Rear spliter, Rear fenders, Sideskirts, Doors, Spoiler, Difusor
Car has loads of modification on suspension:
Every rubber replaced with spherical bearing or aluminum bushing
Modified front subframe with raised control arm mounting points
Fully adjustable racing front control arms
Adjustable rear control arms
Whole rear subframe and trailing arms are raised 4cm
Front ant rear subframes are reinforced with additional brackets connecting them with chassey
This suspension allows you to adjust:
roll centers, bumpsteer, antidive, antisquat
Camber caster adjustment from top mounts and control arm
Adjustable rear subframe height!
POSSIBLE TO ASSEMBLE COMPLETELY FRESH E36 or E92. Check our other ADS for E92 assembly.
Suspension, front frame, bodykit parts can be manufactured and sold separately.