Description:

Pre Crossflow Items - 997cc 109E Block with STD 81mm (worn) bores £300, Sump for 1500 (front well/rope seal) £40.00, 6 x 1500 Push Rods £50.

Crossflow Items - Escort (rear well) Sump £40,00, 4 x 1600 STD Pistons for flat head (useable) £80.00, Set of Head Bolts £40.00, Set of 711M Rockers £80.00, Set of Rocker Pedestals £40.00, Tensioner Assy £40.00, 711M timing Cover £25.00, Duplex Vernier Cam Sprocket £50.00, Inlet Manifold for twin 45's £95.00, Rear Oil Seal Housing for 711M £30.00, Lightweight Flywheel (12 bolt, but would fit on 6) for 7.5" standard clutch with good 110 T. Ring Gear £150.00, Helix 7.5" Clutch Cover (straight fingers) as new £120.00, Set standard Square Main caps c/w Bolts £60.00, Water Pump Pulley £15.00, 5 x 1600 Push Rods £30.00, Crank Pulley £10.00,

Twin Cam Items - Early Block (LP4624) with good 85mm bore £300.00, 711M Block with fresh standard bore (82.55mm) & decked to suit 1700 conversion £400, Crank Pulley £15.00, Set of 125E Con Rods £100.00, Pair Cam Sprockets £40.00, Set orig Lotus Carb Spacer Plates £30.00, Lucas 43D Aldon 103TC Distributor (little use) £80.00, Pair Dellorto 40 DHLA Carbs jetted for Elan Sprint (just cleaned & rebuilt with all new gaskets, needle valves & pump diaphragms) £450.00.

Other Items - Set BDG Omega 2 ring Pistons 90.5mm with .970" comp height (have just slight wear would be fine in 90.46mm bore) £300.00, 4-Port Cosworth Oil Pump (5/8 Pressure & 7/8 Scav rotors) in good useable condition £150.00, Toothed Crank Pulley 30T. x 1/2" wide £40.00, Ultralight 6-bolt Flywheel (Std Dia) for 7.25" race clutch (needs new ring gear) £100.00, AP Race Twin Plate Clutch 184mm (7.25") A-Ring steel type,little use, plates are 2.55 &2.58mm (new are 2.63) £400.00.

Open to offers on all items