Formula Jedi 600
Brief history, this was the 2004 Formula Honda 600 championship winning car driven by Jody Hemming, ran by Ben Muttock of Sywell Leisure Sports, he later took Jody all the way up to Euroboss running a Jordan F1 car
Car was inactive for many years, recommissioned during 2017 for Monoposto 2018 season and with the following parts fitted:
New top spec OMP harness, side and shoulder adjustable in car.
New extinguisher bottle and pull cables
Msa spec ROPS supplied by race spec cages, tig welded installation, new upper harness mounts to HANS dimensions also incorporating seat mountings
New alloy upper and lower bulkhead
Spa stepper motor tacho
Healtech gear indicator
Tillet R3 seat
Spa convex lens mirrors
Dyna coil packs and 8mm leads
FIA spec approved flashing rain light/warning light
Amd old type transponder, 12v hard wired to the isolator.
Tony scott built engine, HRC cams, ported and close ratio gear set. Recently repacked silencer,no issue with noise tests, exhaust has a lambda probe and there is a dash mounted AFR meter so the carbs and exhaust can be tuned to get optimum power for the given altitude/weather conditions. Carbs have been altered so jets can be changed without removing float bowls
Car is sat on bespoke three piece wheels with magnesium centres, comes with a total of 16! Wheels, a set of wet, a set of inters and two sets of slicks, admittedly these are old and probably not race winners, but suit practice and getting used to the car. Also has titanium wheel nuts, to highlight the money spent on the car. The car is currently under weight, with me (90KG) I had 15kg of lead mounted directly underneath the driver seat.
Space wise I’m 6ft and have long legs and fit it, if you’re much taller you might have issues, there’s some adjustment to go still, only way to tell is to sit in it.
Only one DNF in 2018, spin in race 1, no mechanical failures, finished every session under its own power (20 sessions plus Aintree) Finished 9th in the Mono1000 Championship.
There is a full spares package with the car, including: boxes and boxes of engine spares, spare wings, nose, wishbones, fresh head etc. Jedi fabricated aluminium skinned single axle box trailer, internal wheel rack, load ramps, etc, made to fit the car perfectly.
The car has a new clutch currently not installed, can be done before sale if wanted.
I bought the car off a gentleman in 2019, as a project while I study motorsport engineering, the car ahs been run a few times a curborough sprint course for testing but has seen very no hard time in my ownership.
The previous owner repainted the car, so it has a fresh livery,
Keyword Search Terms:Jedi, formula, single seater, race, CBR600
Joined October 2019
Seller's other ads
|Trade or Private:||Private|
Share by Email