Description:

 

„ Application: -55 to 300°C „ Accuracy at 25°C: ± 0.3°C „ Accuracy at 100°C: ± 1.3°C „ Male thread: M8 x 1 „ Nominal resistance: 10 kOhm ± 1 % (at 25°C)

This sensor is designed to measure temperatures up to 300°C of oil, water, fuel or air. This signal is used as a control value for engine control units or as a measurement value which is logged in a data acquisition system. The NTC-sensing element has a negative temperature coefficient. This means, that with increasing temperature the conductivity rises and the resistance decreases. To improve a good protection against the ambient temperature, the housing is made of stainless steel and partly filled with an isolation-paste. The main benefit of the sensor is a very robust design and its very short response time

Website:

https://www.bosch-motorsport.com/content/downloads/Raceparts/Resources/pdf/Data%20Sheet_70088843_Temperature_Sensor_NTC_M8-HS.pdf