Buy & sell race cars, rally cars, transporters, trailers & parts.

VMEP- drive

£ 6,500

Honda civic Type R

GPBox

Description:

It is unfortuantely time to sell my Honda Civic track car. 

The car has seen an unbelieveable transformation, been fully stripped and rebuilt into what it is today. 

No expense has been spared in the build of the car and has been a great car for me. 

The list of mods are as follows:

Engine/Gearbox

Genuine chain and tensioner fitted 2 years ago along along with all genuine gaskets, headstuds and seals (have reciepts)

Competition clutch stage 2

Competition clutch lightened flywheel

Skimmed head at the same time the chain was done

RBC inlet in black

70mm throttlebody (unbranded)

K&N air filter sprayed black

Japspeed 2.5" B pipe to a 4.5" custom backbox

Japspeed 2.5" exhaust manifold bought new (have receipt)

Decatted

Rocker cover sprayed in blue with custom design on spark plug cover

Iridium spark plugs

AC delete

Blue engine dress up bolts

Tegiwa oil cap

Tegiwa torque dampener (have receipt)

Polybush engine mount inserts (have receipt)

Some blue silicon hoses

Clockwise motion baffled sump (have receipt)

K100

Mapped by tdi to 246 BHP (have print out)

Wavetrac diff bought second hand but never fitted to another car

5.1 final drive

MTF gearbox oil

All gearbox parts fitted by grinspeed along with new diff bearings (have receipt)

Suspension

BC br coilovers all working (bought new)

Tegiwa rear camber arms (have receipt)

Tegiwa extended ball joints (have receipt)

Energy Suspension polybushed lower control arms front and rear (have receipt)

Subframe locking collars (have receipts)

All new droplinks changed about 300 miles ago

New rear toe bolts as the old ones had rusted (have receipt)

Extended inner control arms to allow for decent camber on front

Brakes and wheels

Rota fighters in bronze with tiny stone chip (have receipt)

Budget tyres for on the road, i have a second set of alloys that can be used as race tyres

Standard brake calipers 

MOTUL RBF 600 racing brake fluid

ABS delete

Brake lights wired into a switch and can be turned off

Hel braided brake lines front and back

PBS pads and pagid blank discs all round

Standard brake lines completely removed and replaced with copper piping that runs through cab

Hydraulic handbrake which has had a base plate fabricated and welded in

OBP competition brake bias to correct for weight reduction

Exterior

Completely resprayed in yellow (have paint code)

Plastic windows all round bought from ACW plastics with sliders on the front (have receipt)

Custom made front splitter which goes all the way underneath to the back of the engine and attaches to the chassis and sub frame

Custom made front canards

Custom made side skirts

Custom made rear diffuser

Rear diffuser holes cut out with overplates so it looks tidy

Naca duct cut into bonnet

Lockable bonnet pins

Custom made cold air feed which goes through the prefacelift light

Mugen front lip

Mugen grill

Mugen spolier

Facelift wing mirrors (indicators not wired in)

Interior

Completely stripped out and resprayed nighthawk black

Completely rewired the whole car and removed unecessary wires

Old heaters removed and a 3kg heater installed

Fuseboard wired in for all switches and gauges

Cut and flock dash

Yellow tinted clocks

Doors cut and all mecanisms removed

Custom made door cards with handles

Phone charger wired in place of cigerette lighter

Blue monaco pro fixed back bucket seats with blue sparco harnesses

Support bar welded in for the bucket seats so they are fixed to car, can be adjusted

OMP 6 point rollcage sprayed in same blue as rockerhead cover

Plates welded in for cage

OMP D shaped steering wheel (rep)

HKB steering wheel boss

Volt meter, oil pressure gauge and water temp gauge fitted

Switch board and push button start up

Battery kill switch

Interior kill switch wired in

Interior blue LED light strip wired in

Custom made centre console to support switches and gauges

Two fire extinguishers located under both seats

Battery relocated with battery box

 

I believe thats it and i have plenty of pictures and videos of the work being carried out.

It does require a few bits, the digital water gauge needs wiring, the wheels need tracking and the bonnet pins are sticky.

 

 

 

 

 




Details:

Seller: ScottT
  Scott Thompson
Seller's other ads
Country: United Kingdom
City: Manchester
Phone: +447946061769
07946061769
Currency: GBP
Trade or Private: Private
Price: £6,500
Added: 25/03/2020
Views: 1344
Share by Email Print page Report Sold