Buy & sell race cars, rally cars, transporters, trailers & parts.

Connaught

£ 275,000+VAT

2 Touring Car transporter with double slide out office

Apex

Description:

 

We can duplicate the following or modify the specification to your requirments, all of our current transporters are manufactured on our "Mega Low" chassis to maximise internal loading space.  Delivery 16 weeks

Base description:        A new build transporter that can carry up to two touring cars.  At the circuit the lower deck will convert into a driver/engineers room.  The front area forms a large engineer’s room approx 7000mm long to accommodate upto 28 people with two slide pods to maximise the room volume.

Trailer:                        2020 Unused Bespoke double deck chassis.

Length:                        13.89m

Height:                            4.05m @1250mm pin height

Wheel diameter:          17.5”

Mot:                                 N/a

Type Approval:             European type approval.

Deck heights:             Top deck 1490mm, Lower deck 1910mm height.

Tail lift:                       Dhollandia. DHVO3  2,500kg 

Paintwork.                 1 colour non metallic. Roof finished in high gloss white not painted.

Awning:                      N/a

Generator:                  No

Compressor:               Hydrovane 415v spec tbc.

Roof:                          32mm insulated gloss white.

Mast:                          2 x Clarks 11mtrs air operated masts.

Internals working from the front of the Transporter

Engineers Office:

Overview:      The engineer’s office starts at the front of the trailer.  The full width of the front wall consists of storage cupboards as required, air condition ing and two tv’s for circuit data.  Each side of the office will then have a slide out pod that will project 1000mm to maximise floor space.  Each pod will be fitted with 6000mm desk to enable engineers to work from.  The centre of the room will have two table size to be confirmed for additional engineers.

The rear of the pod will consist of two full height closets, centrally mounted will be a door leading to stairs to the lower workshop area.

Front wall:  Four equal sized base units, with a central shelf in each, two televisions for circuit data with Air conditioning mounted above.

Rear Wall: Two full height wardrobes with a central base unit between, above the base units will be a second air-conditioning unit.  There will not be any access to the lower or top deck from the main office.

Lower deck

The Lower deck will carry 1 car of a maximum height 1490mm during transit or can be used as a bulk storage area, at the circuit it converts to either a drivers area or engineers room.

Working From the rear:

Walls & Ceiling:          High gloss white.

Floor:                         Finished in black vinyl with recessed                                           tracking for securing location tbc.

                                  2x Recessed 230 volt power sockets

Lighting:                     LED strip recessed into the ceiling at approx. 1000mm centres.

Power:                        3 double European sockets per side.

Tables:                       4 Removable tables as required.        

The table legs will have to be designed to suit the trailer chassis/axle configuration below

Table bags:                 Bags to store the table during transit.

Windows:                   2x Double glazed windows per side   Blinds recessed into the walls.

Seating:                      Black leather cushions with travelling bags to fit on top of the wheel archs and also continue full length to the rear on the side opposite the personnel door.

Hanging Rail:              1 removable rail at the rear to hang overalls etc.

Air conditioning:         Centrally mounted on the front wall.

Wall tracking & rub rails:        Full length location tbc.

Hatch:   Centrally mounted at the rear, the hatch will pivot upwards towards the rear of the trailer.

PVC TL cover:                        White Pvc cover to cover the inside of the tail lift at the circuit.

 

Top Deck                       Height 1480mm, Length 5080mm     

Walls and the ceiling: High gloss white.

Protection:                 1 x full length of anti-rub rail on each wall.

Height & width tbc or just an additional row of tracking??

Floor tracking:             3x lengths of tracking recessed into the floor.

Floor Finish:                Black flec vinyl

Lighting:                   LED lighting recessed into the ceiling at 1200mm centres.   

Belly Lockers:             2 Belly lockers length approx 1700mm each, height 750mm, width 2450mm

 

£270,000+vat             

 

Possible Additions:

Generator:                   As required.   

13KW Kohler 13EFKOZDRR 12V start, 415v, remote radiator mounted to baseplate.

We can evolve this layout as required to suit your bespoke requirements, please see our website for other options.

Additional photos, drawings  and a detailed specification are available by request.

 

 

 




Website:

http://www.hopkinsmotorsport.com

Details:

Seller: Hopkins Motorsport Ltd
  Philip Hopkins
Seller's other ads
Company Hopkins Motorsport Ltd
Country: United Kingdom
City: Bristol
Phone: 01179 509294
Currency: GBP
Trade or Private: Trade
Price: £275,000+VAT
Added: 02/07/2019
Views: 3445
Share by Email Print page Report Sold